HARDWARE PIPE

Black and Galvanized Steel Pipe

Albany Pipe & Nipple delivers workable, threaded, uniform pipe. Delivered clean.
Delivered promptly.

Albany Pipe & Nipple threads welded steel pipe in 1/8" through 4" nominal sizes. Available inventory in 1/8" to 12" pipe sizes produced to various ASTM standards is maintained to meet your pipe requirements. Care, pride and quality service are bonus features that go into product from nipples to 10 foots.

Standard Pipe Schedule 40 Extra Strong Pipe Schedule 80
Nominal
Pipe
Size
Outside
Diameter
(Inches)
Inside
Diameter
(Inches)
Wall
Thickness
(Inches)
Weight per foot (lbs.)
Inside
Diameter
(Inches)
Wall
Thickness
(Inches)
Plain
End
Weight
(Inches)
Plain
End
Threads &
Couplings
1/8 .405 .269 .068 .24 .24 .215 .095 .31
1/4 .540 .364 .088 .42 .42 .302 .119 .54
3/8 .675 .493 .091 .57 .57 .423 .126 .74
1/2 .840 .622 .109 .85 .85 .546 .147 1.09
3/4 1.050 .824 .113 1.13 1.13 .742 .154 1.47
1 1.315 1.049 .133 1.68 1.68 .957 .179 2.17
1-1/4 1.660 1.380 .140 2.27 2.28 1.278 .191 3.00
1-1/2 1.900 1.610 .145 2.72 2.73 1.500 .200 3.63
2 2.375 2.067 .154 3.65 3.68 1.939 .218 5.02
2-1/2 2.875 2.469 .203 5.79 5.82 2.323 .276 7.66
3 3.500 3.068 .216 7.58 7.62 2.900 .300 10.25
3-1/2 4.000 3.548 .226 9.11 9.20 3.364 .318 12.5
4 4.500 4.026 .237 10.79 10.89 3.826 .337 14.98
5 5.563 5.047 .258 14.62 14.81 4.813 .375 20.78
6 6.625 6.065 .280 18.97 19.18 5.761 .432 28.57
8 8.625 7.981 .322 28.55 29.35 7.625 .500 43.39
10 10.750 10.020 .365 40.48 41.85      
12 12.750 12.000 .375 49.56 51.15      

SPECS FOR STANDARD AND EXTRA STRONG PIPE
Standard and extra strong welded pipe are produced in 1/8" to 4". Trade
sizes 5" and up are available in seamless or electric resistance welded. Trade
sizes 1/8" to 4" are produced to ASTM A53, A501 and A589** Type II, API 5L
and Federal Specification WWW-P404. Trade sizes 5" and up are produced
to ASTM A 53 and API 5L. All pipe threads conform to ANSI B1.20.1.
Merchant couplings comply with ASTM A 865.
*1/2" through 4" only
**1" through 4" only

Permissible Variations for ASTM A 53–A Pipe
O.D. 1/8" to 1-1/2" Over 1/64" Under 1/64"
O.D. 2" and up Over 1% Under 1%
Wall Thickness at Any Point Under 12.5%

ASTM A 53–A: Black and Galvanized Pipe is manufactured for
ordinary uses in steam, water, gas and airlines.
Mechanical Properties:
Yield: 30,000 psi minimum
Tensile: 48,000 psi minimum